• wayaLambar waya: 0086-28-87457505
  • imelEmail: sales@cwlbearing.com
    • sns_1 sns_2 sns_3 sns_4
    English
    shafi_banner

    Kayayyaki

    Bearings na NKI 9/12 na allura tare da zoben da aka yi da injina, tare da zoben ciki Hoton da aka Fito
    • Bearings na NKI 9/12 na allura tare da zoben da aka yi da injina, tare da zoben ciki
    • Bearings na NKI 9/12 na allura tare da zoben da aka yi da injina, tare da zoben ciki
    • Bearings na NKI 9/12 na allura tare da zoben da aka yi da injina, tare da zoben ciki

    Bearings na NKI 9/12 na allura tare da zoben da aka yi da injina, tare da zoben ciki

    Takaitaccen Bayani:

    Na'urar ɗaukar allura cikakke ce wadda ta ƙunshi zoben waje da aka yi da injina, na'urar naɗa allura da kuma keji da kuma zoben ciki da za a iya cirewa.

    yana da ƙanƙanta sosai saboda ƙarancin tsayin sashin radial ɗinsu.

    Bearing ɗin allura yana da ramin shafawa da kuma ramin shafawa a cikin zoben waje.

    Ana amfani da belin allura mai zobe na ciki idan shaft ɗin bai dace da hanyar tsere mai birgima ba.

    NKI jerin haske ne don diamita na shaft daga 5 mm zuwa 100 mm


    Cikakken Bayani game da Samfurin

    Alamun Samfura

    Bearings na NKI 9/12 na allura tare da zoben da aka yi da injina, tare da zoben cikicikakken bayaniBayani dalla-dalla:

    Kayan aiki: 52100 Chrome Karfe

    Jerin: tare da zoben ciki

    Ginawa: Layi Guda ɗaya

    Gudun Iyaka: 27000 rpm

    Nauyi: 0.017 kg

     

    Babban Girma:

    Diamita na Bore (d): 9 mm

    Juriyar Diamita na Bore: 0.008 mm zuwa 0 mm

    Zoben ciki na hanyar tsere (F): 12 mm

    Diamita na waje (D): 19 mm

    Juriyar diamita na waje: - 0.009 mm zuwa 0 mm

    Faɗi (B): 12 mm

    Juriyar Faɗi: - 0.12 mm zuwa 0 mm

    Girman zoben waje (r) minti: 0.3 mm

    Canjin axial da aka yarda da shi daga matsayin da aka saba na zoben ɗaukar kaya ɗaya idan aka kwatanta da ɗayan (s1): 1.5 mm

    Ƙimar nauyi mai ƙarfi (Ca): 6.40 KN

    Matsayin nauyi mai tsayayye (Coa): 7.10 KN

     

    GIRMAN ABUTMENT

    Mafi ƙarancin shaft ɗin diamita na abutment da aka yarda da shi, bearings tare da flanges (da) min.: 11 mm

    Girman diamita na abutment (tare da flanges) (Da) matsakaicin: 17 mm

    Matsakaicin radius na fillet (ra): 0.3 mm

    Zane na NKI
  • Na baya:
  • Na gaba:
    • Rubuta saƙonka a nan ka aika mana da shi

    kayayyakin da suka shafi

    Danna Shigar don bincike ko ESC don rufewa