• wayaLambar waya: 0086-28-87457505
  • imelEmail: sales@cwlbearing.com
    • sns_1 sns_2 sns_3 sns_4
    English
    shafi_banner

    Kayayyaki

    32030 layi ɗaya bearings masu taurare Hoton da aka Fito
    • Bearings na nadi mai layi ɗaya na 32030

    Bearings na nadi mai layi ɗaya na 32030

    Takaitaccen Bayani:

    An ƙera bearings na nadi mai layi ɗaya don ɗaukar nauyin radial da axial tare kuma suna ba da ƙarancin gogayya yayin aiki. Zoben ciki, tare da nadi da keji, ana iya ɗora su daban da zoben waje. Waɗannan abubuwan da za a iya rabawa kuma waɗanda za a iya musanyawa suna sauƙaƙa hawa, saukewa da kuma gyara su. Ta hanyar ɗora bearings nadi mai layi ɗaya mai layi ɗaya a kan wani da kuma sanya kayan da aka riga aka ɗora, ana iya cimma aikin bearings mai tauri.

    Juriyar girma da ta geometric na bearings masu tauri kusan iri ɗaya ne. Wannan yana ba da mafi kyawun rarraba kaya, yana rage hayaniya da girgiza, kuma yana ba da damar saita kayan da aka riga aka ɗora daidai.

     

     


    Cikakken Bayani game da Samfurin

    Alamun Samfura

    Bearings na nadi mai layi ɗaya na 32030cikakken bayaniBayani dalla-dalla:

    Kayan aiki: 52100 Chrome Karfe

    Ginawa: Layi ɗaya

    Jerin awo

    Gudun iyakance: 2600 rpm

    Nauyi: 6.4 kg

     

    Babban Girma:

    Diamita na ramin (d):150mm

    Diamita na waje (D): 225mm

    Faɗin zoben ciki (B): 48 mm

    Faɗin zoben waje (C): 36 mm

    Jimlar faɗi (T): 48 mm

    Girman Chamfer na zoben ciki (r) minti.: 3.0 mm

    Girman Chamfer na zoben waje (r) min.: 2.5 mm

    Ƙimar nauyi mai ƙarfi(Cr):333.00 KN

    Matsayin kaya mai tsayayye(Kor): 580.00 KN

     

    GIRMAN ABUTMENT

    Diamita na abin da ke haɗa shaft (da) matsakaicin: 165mm

    Diamita na shaft ablation(db)minti.: 164.5mm

    Diamita na mahaɗin gidaje(Da) minti.: 200mm

    Diamita na mahaɗin gidaje(Da) matsakaicin: 212.5mm

    Diamita na mahaɗin gidaje(Db) minti.: 216mm

    Mafi ƙarancin faɗin sarari da ake buƙata a cikin gida a babban fuska na gefe(Ca) min.: 8 mm

    Mafi ƙarancin faɗin sarari da ake buƙata a cikin gida a kan ƙaramin fuska na gefe(Cb) minti: 12 mm

    Radius na fillet ɗin shaft (r)a) matsakaicin: 3.0mm

    Radius na fillet ɗin gida(rb) matsakaicin: 2.5mm

    Jerin ma'auni masu taurare nadi bearings
  • Na baya:
  • Na gaba:
    • Rubuta saƙonka a nan ka aika mana da shi

    kayayyakin da suka shafi

    Danna Shigar don bincike ko ESC don rufewa